FY 08-09

  1. Performance of titaniasilica composite coating on interstitial-free steel sheet;
    T K Rout, N Bandyopadhyay, R Narayan, N Rani and D K Sengupta; Scripta Materialia; Vol. 58 (2008); pp. 473-476

  2. Hybrid neural GA model to predict and minimise flatness value of hot rolled strips;
    S John, S Sikdar, P K Swamy, S Das and B Maity; Journal of Materials Processing Technology; Vol. 195 (2008); pp. 314-320

  3. Role of silicon on oxide morphology and pickling behaviour of automotive steels;
    A Chattopadhyay and T Chanda; Scripta Materialia; Vol. 58 (2008); pp. 882-885

  4. Comparative study of precipitation behaviour and texture formation in continuously annealed Ti and Ti + Nb added interstitial-free high-strength steels;
    P Ghosh, R K Ray, C Ghosh and D Bhattacharjee; Scripta Materialia; Vol. 58 (2008); pp. 939-942

  5. Effect of plating time for electroless nickel coating on rebar surface: An 3 option for application in concrete structure;
    M  Manna, N Bandyopadhyay and D Bhattacharjee; Journal of Surface & Coating Technology; Vol. 202 (2008); pp. 3227-3232

  6. Evolution of microstructure, texture and grain boundary character in a severely cold rolled Ti + Nb IF steel;
    R Saha and R K Ray; Journal of Materials Science; Vol. 43 (2008); pp. 207-211

  7. Effects of severe cold rolling on the texture and grain boundary character of a Ti-Nb IF Steel;
    R Saha and R K Ray; Materials Letters; Vol. 62; Issue 2, 2008; pp. 222-225

  8. Improvement of drawability of titanium-stabilized interstitial-free steel by optimization of process parameters and texture;
    K Banerjee, A K Verma and T Venugopalan; Met Trans A; Vol. 39A (2008); pp. 1410-1425

  9. Study of inclusion bands in continuously cast steel billets for rolling thermomechanically-treated (TMT) re-bars;
    J C Pandey, P N Choubey and M Raj; Met Trans A; Vol. 39A (2008); pp. 4727-4737

  10. Optimization of electromagnetic stirring in continuously cast steel billets using ultrasonic C-scan imaging technique;
    M Raj and J C Pandey; Ironmaking and Steelmaking; Vol. 35, Issue4 (2008); pp. 288-296

  11. Study of recrystallization in interstitial free (IF) steel by ultrasonic measurements;
    J C Pandey; Ironmaking and Steelmaking; Vol. 35, Issue 4 (2008); pp. 297-302

  12. Precipitation behaviour and texture formation at different stages of processing in an interstitial free high strength steel;
    P Ghosh, C Ghosh, R K Ray and D Bhattacharjee; Scripta Materialia; Vol. 59 (2008); pp. 276-278

  13. Numerical analysis of particle transport during solidification using models based on stochastic differential equation;
    S Ganguly and S Chakraborty; Materials Science and Technology; Vol. 24; Issue 5 (2008); pp. 540-546

  14. On the micromechanism of fatigue damage in an interstitial-free steel sheet;
    S Majumdar, D Bhattacharjee and K K Ray; Met Trans A; Vol. 39A (2008); pp. 1676-1690

  15. Studies on hot-rolled galvanised steel sheets: segregation of alloying elements at the surface;
    A Chattopadhyay, V S Sarma, B S Murty, A Haldar and D Bhattacharjee; Scripta Materialia; Vol. 59 (2008); pp. 522-525

  16. Effect of activated bentonite on properties of green and fired chromite pellets;
    S  Dwarapudi, S M Rao, J V S N Murthy, D D Parida and K S Raju; Ironmaking and Steelmaking; Vol. 35, Issue 4 (2008); pp. 308-314

  17. Influence of pellet size on quality and microstructure of iron ore pellets;
    S Dwarapudi, T U Devi, S M Rao and M Ranjan; ISIJ International; Vol. 48, Issue 6 (2008); pp. 768-776

  18. Structural and textural characterisation of the substrate and coated layer in an industrial galvannealed interstitial free steel;
    A Chakraborty, R K Ray and S Sangal; Met Trans A; Vol. 39A (10); pp. 2416-2423

  19. A novel method to measure cleanliness in steel using ultrasonic C-scan image analysis;
    J C Pandey, M Raj, T K Roy and T Venugopalan; Met Trans A; Vol. 39B (2008); pp. 439-446

  20. Development of hypoeutectoid graphitic steel for wires;
    K Banerjee and T Venugopalan; Materials Science and Technology; Vol. 24, Issue 10 (2008); pp. 1174-1178

  21. Application of Terminalia chebula for removal of hexavalent chromium in chromite concentrates;
    G Kapure and S M Rao; ISIJ International; Vol. 48, Issue 6 (2008); pp. 868-874

  22. Evolution of annealing texture in Ti-stabilised interstitial free steel;
    K Banerjee; Steel Grips; Vol. 6, Issue 4 (2008); pp. 274-282

  23. Mass distribution in the falling stream of burden materials;
    S Nag, M Guha, S Kundu, S K Sinha and U Singh ; ISIJ International; Vol. 48, Issue 9 (2008); pp. 1316-1318

  24. Study the effect of chromite ore properties on pelletisation process;
    V Singh and S M Rao; International Journal of Mineral Processing; Vol. 88 (2008); pp. 13-17

  25. Thermodynamic evaluation of formation of oxide sulfide duplex inclusions in steel;
    S K Choudhury and A Ghosh; ISIJ International; Vol. 48, Issue 11 (2008); pp. 1552-1559

  26. Numerical modeling studies of flow and mixing phenomena in gas stirred steel ladles;
    S Ganguly and S Chakraborty; Ironmaking and Steelmaking; Vol. 45, Issue 7 (2008); pp. 524-530

  27. Microstructural characterization of TRIP aided steels;
    M Mukherjee, S B Singh and O N Mohanty; Materials Science and Engineering A; Vol. 486A (2008); pp. 32-37

  28. Deformation induced transformation of retained austenite in TRIP aided steels: A thermodynamic model;
    M Mukherjee, S B Singh and O N Mohanty; Met Trans A; Vol. 39A (2008); pp. 2319-2328

  29. Microstructure, texture, grain boundary characteristics and mechanical properties of a cold rolled and annealed martensitic steel;
    C Ghosh, A Haldar, P Ghosh and R K Ray; ISIJ International; Vol. 48, Issue 11 (2008); pp. 1631-1639

  30. A novel beneficiation scheme for a medium coking coal fines from India;
    A Das, B Sarkar, A Vidyadhar, A K Singh and K K Bhattacharyya; International Journal of Coal Preparation and Utilization; Vol. 28 (2008); pp. 189-200

  31. Floatability characteristics: a case study with three typical Indian prime coking coals;
    D Chakraborty, A K Singh and P K Banerjee; Mineral Processing and Extractive Metallurgy Review; Vol. 29, Issue 4 (2008); pp. 299-317

  32. Numerical simulation of flow-induced wall shear stress to study a curved shape billet caster tundish design;
    V Singh, A R Pal and P Panigrahi; ISIJ International; Vol. 48, Issue 4 (2008); pp. 430-437

  33. Surface engineering of steel sheet through sol-gel processes;
    A K Singh, N Bandyopadhyay and D K Sengupta; Steel Tech; Vol. 2, Issue 4 (2008); pp. 31-41

  34. Effects of microstructure and texture on the formability character of the coatings in three industrial galvannealed steels;
    A Chakraborty and R K Ray; ISIJ International; Vol. 48, Issue 12 (2008); pp. 1771-1780

  35. Effect of variation of alumina on development of phases during iron ore sintering;
    M K Choudhary, D Bhattacharjee, P S Bannerjee and A K Lahiri; ISIJ International; Vol. 48, Issue 12 (2008); pp. 1804-1806
    Split ends and cracking problem during hot rolling of continuously cast steel billets    ;