| :: PRODUCT :: |
Sl. |
Title |
Journal |
Author |
| R&D’s INTERNATIONAL PUBLICATIONS IN REFEREED
JOURNALS |
| 1 |
Effect of
galvanising parameters on spangle size investigated by data mining technique. |
ISIJ
(Selected Ten) |
Monojit
Dutta, A. Mukhopadhyay and S. Chakrabarti |
| 2 |
Study of
the aging behaviour in copper bearing high strength low alloy steel. |
ISIJ
(Selected Ten) |
A.N.
Bhagat, S.K. Pabi, C. Ban and O.N. Mohanty |
| 3 |
Prediction
of phase transformation and microstructure in steel using cellular automation technique. |
ISIJ
(Selected Ten) |
S. Kundu,
M. Dutta, S. Ganguly and Sanjay Chandra |
| 4 |
A
modified analytical approach for modelling grain growth in the coarse grain HAZ of HSLA
steels. |
ISIJ
(Selected Ten) |
M. Shome,
O.P. Gupta and O.N. Mohanty |
| 5 |
Effect of
simulated thermal cycles on the microstructure of HAZ in HSLA-80 and HSLA-100 steel
plates. |
ISIJ
(Selected Ten) |
M. Shome,
O.P. Gupta and O.N. Mohanty
|
| 6 |
Modelling
of microstructure and heat transfer during controlled cooling of low carbon wire rod.
|
ISIJ
(Selected Ten) |
S. Kundu,
A. Mukhopadhyay, Sudin Chatterjee and S. Chandra
|
| 7 |
Precipitate
dissolution and grain growth in the heat affected zone of HSLA-100 steel. |
ISIJ
(Selected Ten) |
M. Shome,
D.S. Sharma, O.P. Gupta and O.N. Mohanty |
| 8 |
Neutron
diffraction measurement of the internal stresses following heat treatment of a plastically
deformed Al/SiC particulate metal-matrix composite.
|
ISIJ
(Selected Ten) |
M. Dutta,
G. Bruno, L. Edwards and M.E. Fitzpatrick
|
| 9 |
An
alternative fixed grid method for the solution of the classical one-phase Stefan problem. |
Applied
Mathematics and Computation |
A.K.
Verma, S. Chandra and B.K. Dhindaw |
| 10 |
25
Development and validation of a finite element model for hot rolling
using ABAQUS/STANDARD |
Materials
Science and Technology |
A.
Mukhopadhyay, I.C Howard and C.M. Sellars |
| 11 |
Effect of
grain size on the tribological behavior of nanocrystalline nickel. |
Materials
Science & Engineering |
A
R. Mishra, B. Basu and R. Balasubramanium |
| 12 |
Effect of
nanocrystalline grain size on the electrochemical and corrosion behavior of nickel. |
Corrosion
Science
(Selected Ten) |
R. Mishra
and R. Balasubramaniam |
| 13 |
Grain
Orientation dependence of microstructures in a warm rolled IF steel. |
Acta
Materialia (Selected Ten)
|
A.
Haldar, X. Huang, T. Leffers, N. Hansen and R.K. Ray |
| 14 |
Numerical
determination of heat transfer coefficient for boiling phenomenon of run-out table of a
Hot Strip Mill. |
Ironmaking
and Steelmaking (Selected Ten) |
Sudipta
Sikdar and A. Mukhopadhyay |
| R&D’s INTERNATIONAL PUBLICATIONS IN REFEREED
JOURNALS [ACCEPTED PAPERS] |
| 1 |
Prediction
of mechanical properties of hot rolled low carbon steel strips using artificial neural
network. |
Materials
and Manufacturing Processes |
A.
Mukhopadhyay and Asif Iqbal |
| 2 |
Optimizing
surface profiles during hot rolling : A genetic algorithms based multi-objective
optimization. |
Materials
and Manufacturing Processes |
N.
Chakraborti, B. Siva Kumar, V. S. Babu, S. Moitra and A. Mukhopadhyay |
| 3 |
Mechanistic
interpretation of electrochemical behaviour of galveannealing coating in saline
environment. |
Corrosion
Science(Selected Ten) |
T.K.
Rout, N. Bandyopadhyay, T. Venugopalan and D. Bhattacharjee |
| 4 |
Influence
of process parameters during water cooling at run-out table. |
International
Journal of Modelling and Simulation |
Sudipta
Sikdar and A. Mukhopadhyay |
| 5 |
On the
numerical treatment of diffusional phase transformation through fully implicit control
volume method. |
Materials
Science and Technology |
A.K.
Verma, Sanjay Chandra and B.K. Dhindaw |
| 6 |
Implementation
of an on-line run-out table model in a Hot Strip Mill. |
Journal
of Materials Processing Technology |
A.
Mukhopadhyay and S. Sikdar |
| 7 |
Finite
element modelling of the effects of roll gap geometry in Hot Rolling. |
Materials
Science and Technology |
A.
Mukhopadhyay, I.C. Howard and C.M. Sellars |
| 8 |
Corrosion
behaviour of galvannealed steel sheet produced. |
Surface
& Coating Technology (Selected Ten)
|
N.
Bandyopadhyay, G. Jha, A.K.Singh, T.K. Rout and Nitu Rani |
| 9 |
Regulating
crown and flatness during hot rolling : a multiobjective optimization study using genetic
algorithms. |
Materials
and Manufacturing Processes |
A.
Mukhopadhyay, R. Nandan, R. Rai, R. Jayakanth, S. Moitra and N. Chakraborti |
| 10 |
13
Effect of Filler Alloys on HAZ Cracking in Pre-Weld Heat Treated
IN738LC GTA Welds. |
Met.
Trans A (Selected Ten) |
K.
Banerjee, N. L. Richards and M. C. Chaturvedi |
| 11 |
14
Use of Flow Barriers to Eliminate Vortex in the Flow Field Generated in
a Continuous Galvanizing Bath. |
ISIJ
(Selected Ten) |
Sukanta K
Dash, Monojit Dutta and N. Rajesh |
| 2005 |
| 1 |
Oxide
scale characterization of hot rolled coils by Raman spectroscopy technique. |
Scripta
Materialia (Selected Ten)
|
A.
Chattopadhyay, N. Bandyopadhyay, A.K. Das and M.K. Panigrahi |
| 2 |
Mathematical
modelling of jet finishing process for hot-dip zinc coatings on steel strip. |
ISIJ
(Selected Ten) |
P.
Naphade, A. Mukhopadhyay and S. Chakrabarti |
| 3 |
Improvement
in surface brightness and prediction of spangle formation time in a continuous galvanising
line through heat balance. |
ISIJ
(Selected Ten) |
M. Dutta,
S. Ganguly, G. Jha, A. K. Singh, S. Chakrabarti and N. Rajesh |
| 4 |
Microstructural
and textural development in an extra low carbon steel during warm rolling. |
Materials
Science & Engineering |
A
A. Haldar and R. K. Ray |
| 2004 |
| 1 |
Effect Of
Galvanising Parameters On Spangle Size Investigated By Data Mining Technique |
ISIJ
International, Volume 44, Number 1, Pages 129-138 |
Monojit
Dutta, Ananya Mukhopadhyay and Shantanu Chakrabarti |
| 2 |
Aging
Behaviour in Copper Bearing High Strength Low Alloy Steels |
ISIJ
Internationa, Volume 44, Number 1, Page. 115-122 |
A. N.
Bhagat, S. K. Pabi, S. Ranganathan and O. N. Mohanty |
| 3 |
Prediction
Of Phase Transformation And Microstructure In Steel Using Cellular Automation Technique |
Scripta
Materialia, Volume 50, Issue 6, March 2004, Pages 891-895 |
S. Kundu,
M. Dutta, S. Ganguly And Sanjay Chandra |
| 4 |
Modelling
of Microstructure and Heat Transfer During Controlled Cooling of Low Carbon Wire Rod |
ISIJ
International, Volume 44, Number 7, Pages 1217-1223 |
Saurabh
Kundu, Ananya Mukhopadhyay, Sudin Chaterjee and Sanjay Chandra |
| 5 |
A
modified analytical approach for modelling grain growth in the coarse grain HAZ of HSLA
steels. |
ScriptaMaterialiaVolume
50, Issue 7, April 2004, Pages 1007-1010 |
M. Shome,
O.P. Gupta and O.N. Mohanty |
| 6 |
Effect of
simulated thermal cycles on the microstructure of HAZ in HSLA-80 and HSLA-100 steel
plates. |
Met.
Trans A, Volume 44, Number 7, Pages 1217-1223(Selected Ten) |
M. Shome,
O.P. Gupta and O.N. Mohanty |
| 7 |
Precipitate
dissolution and grain growth in the heat affected zone of HSLA-100 steel. |
ISIJ(Selected
Ten) |
M. Shome,
D.S. Sharma, O.P. Gupta and O.N. Mohanty |
| 8 |
Neutron
diffraction measurement of the internal stresses following heat treatment of a plastically
deformed Al/SiC particulate metal-matrix composite. |
Acta
Materialia, Volume 52, Pages 3881-3888 |
M. Dutta,
G. Bruno, L. Edwards and M.E. Fitzpatrick |
| 2003 |
| 1 |
Variation
In Structure And Magnetic Properties During Decarb-Annealing Of Electrical Steel.
|
Scripta
Materialia, Volume 49, Issue 5, September 2003, Pages 355-360 |
S.
Chatterjee, D. Bhattacharjee And N. Gope |
| :: INTERNATIONAL JOURNAL :: |
| 2003 |
| 1 |
Development
of conducting polyaniline coating: a novel approach to superior corrosion resistance. |
Surface
and Coatings Technology, Volume 167, Issue 1, 1 April 2003, Pages 16-24 |
T. K.
Rout, G. Jha, A. K. Singh, N. Bandyopadhyay and O. N. Mohanty |
| 2 |
Spangle
Formation On Hot-Dip Galvanized Steel Sheet And It On Corrosion Resistant Property. |
Corrosion |
A.K.
Singh, G. Jha And S. Chakrabarti |
| 3 |
Electrical
Resistivity Studies In Low Carbon And HSLA-100 Steels. |
Materials
Science and Technology (Maney Publishing), Volume 19, Number 3, Pages 343-346 |
A.N
Bhagat, S. Ranganathan And O.N. Mohanty |
| 4 |
Electrical
Resistivity And Phase Transformation In Steels. |
Mat.
Science And Engineering Technology. |
O.N.
Mohanty And A.N Bhagat |
| 2002 |
| 1 |
Development
Of Wear Resistant Material For Cone Crusher Application |
Metals,
Materials And Processes |
A.
Chattopadhyay, J.C. Pandey, N. Bandopadhyay And O.N. Mohanty |
| 2001 |
| 1 |
Modelling
Of Transformation Kinetics In HSLA 100 Steel During Continuous Cooling |
Scandinavian
Journal of Metallurgy, Volume 30, Number 1, Pages 8-13 |
M.
Venkatraman, O.N. Mohanty And R.N. Ghosh |
| 2 |
Seismic
Resistant Reinforcing Bars |
Journal
Of Practical Failure Analysis, Asm International |
G. Jha,
A.K. Singh, N. Bandopadhyay And O.N. Mohanty |
